Hugo is a manufacturer factory of Washing Machine Bases located in China. The base appears simple, but it determines three crucial performance factors: whether the bottom of the machine is easy to clean, whether the body will rust due to damp ground, and whether the machine can maintain a stable position during high-speed dehydration. Hugo designs the base based on these three conditions. Welcome to inquire.
It is a support platform placed at the bottom of the washing machine, mainly used for three purposes: raising the body, facilitating cleaning of the bottom and drainage pipes; Isolate the ground moisture and reduce the corrosion of the aircraft body; Cooperate with adjustable feet or shock absorbers to absorb operational vibrations, reduce noise and displacement.
First, measure the length and width of the body and the distance between the foot holes, then confirm the required load-bearing capacity and lifting height, and finally see if pulleys, anti slip pads, or horizontal adjustment feet are needed. We can assist in matching based on old part photos or model dimensions.
Mainly focus on the following points:
1、 Thickened load-bearing structure, the high-speed dehydration of the drum is also as stable as flat ground
The panel is made of thickened plastic, with reinforcing ribs arranged inside according to the direction of force, and multi-point support formed at the four corners and center. The drum type machine has high dehydration speed and large deformation of the body. The base with insufficient load-bearing capacity is prone to collapse, deformation, and even cracking. Our structural design is specifically designed to thicken it for this working condition.
2、 Anti slip and shock-absorbing design, synchronous reduction of operating displacement and resonance noise
The top is equipped with a whole piece of anti slip rubber pad to increase the friction with the bottom of the body; Install shock-absorbing pads on the feet to block the transmission of vibrations to the ground.
3、 Moisture proof and rust proof treatment, it is not afraid of long-term exposure to humid environments
PP material itself does not absorb water or mold; The steel version has undergone spray coating and anti-corrosion treatment, and the edges and corners have been sealed. The bottom shell of the aircraft does not directly come into contact with ground water vapor, significantly reducing rust and mold problems and extending the service life of the entire machine.
4、 Flexible size and height adaptation, compatible with various models and ground conditions
Support customization based on body length, width, and foot hole spacing, with height options ranging from 5cm to 20cm. Adjustable foot models can handle uneven ground, and can be leveled by adjusting the knob; The mobile model comes with a brake pulley, making it easy to push and pull when cleaning, and does not slide when locked.
It raises the body for easier cleaning of the bottom and drainage pipes, isolates ground moisture to reduce body corrosion, and works with adjustable feet or shock absorbers to absorb vibration, reduce noise and displacement.
Measure the body length and width and the distance between the foot holes, then confirm the load-bearing capacity and lifting height. Also decide whether pulleys, anti slip pads, or horizontal adjustment feet are needed.
Yes, when it is designed for it. A whole anti slip rubber pad on top increases friction with the body, and shock-absorbing pads on the feet block vibration transmission to the ground, reducing both displacement and resonance noise.
PP does not absorb water or mold and suits humid rooms. The steel version uses spray coating and anti-corrosion treatment with sealed edges and corners. Both are designed to keep ground moisture away from the machine body.
Height options range from 5cm to 20cm. Adjustable foot models handle uneven ground, and mobile models come with a brake pulley that locks in place.
Yes. Customization is supported based on body length, width, and foot hole spacing, so the platform matches the machine rather than sitting under it loosely.