Hugo offers a variety of sizes of Washing Machine Hoses, including inlet and outlet pipes, with lengths ranging from 0.5 meters to 3 meters. The product supports customized tube color and can also adjust the length and joint combination according to customer requirements, making it convenient for the whole machine factory and maintenance channels to match uniformly.
It is a water delivery channel that connects the tap water and the washing machine inlet valve, with threaded joints or quick connect buckles at both ends. It often has rubber or woven reinforcement layers inside to withstand the pressure of tap water. The drainage pipe is responsible for leading the washed sewage out of the machine, usually a corrugated hose that is not easily bent and not prone to scaling on the inner wall.
First, confirm the interface form (threaded or quick connect) at both ends, the required length, and the pressure resistance level, and then verify whether it is equipped with an explosion-proof braided layer and a water stop valve. We can assist in matching based on old part photos or model information.
Mainly focus on the following points:
The inner tube is made of high-quality materials, odorless, and resistant to aging. It is not easy to harden and crack when exposed to tap water and detergents for a long time; The drainage pipe is made of flexible PVC, which is resistant to bending and has a smooth inner wall, making it less prone to scaling and odor.
The outer layer of the inlet pipe is reinforced with stainless steel weaving or stainless steel wire, which makes it less prone to bulging and bursting during water pressure fluctuations, making it suitable for high-rise residents and old pipe networks.
The joint is made of reinforced engineering plastic, with high thread accuracy and resistance to slipping; Equipped with dual sealing gaskets, the risk of dripping is low after tightening, and the seal can be maintained even after repeated disassembly and assembly.
The inlet pipe connects the tap water to the washing machine inlet valve and holds water pressure, with threaded joints or quick connect buckles at both ends. The drain pipe carries waste water out of the machine, usually as a corrugated hose with a smooth inner wall.
Confirm the interface form at both ends, threaded or quick connect, the required length, and the pressure resistance level. Then check whether it has an explosion-proof braided layer and a water stop valve.
An inlet hose reinforced with stainless steel weaving or stainless steel wire. The reinforcement makes it less prone to bulging and bursting during water pressure fluctuations.
The joints use reinforced engineering plastic with high thread accuracy and dual sealing gaskets, so the seal can be maintained even after repeated disassembly and assembly.
Lengths range from 0.5 meters to 3 meters, and customized tube color is supported. The length and joint combination can be adjusted to customer requirements.
Yes. Inlet and outlet pipes are supplied to whole machine factories and maintenance channels, with uniform matching supported for restocking and repeat orders.