Products

PRODUCTS

60-92mm Gas Stove Distributor
  • 60-92mm Gas Stove Distributor60-92mm Gas Stove Distributor
  • 60-92mm Gas Stove Distributor60-92mm Gas Stove Distributor
  • 60-92mm Gas Stove Distributor60-92mm Gas Stove Distributor

60-92mm Gas Stove Distributor

The 60-92mm Gas Stove Distributor​ is a burner cap and distributor assembly built for household and commercial gas stoves, covering a 60mm to 92mm diameter range to fit different burner head sizes. The distributor's internal gas passages and edge slots mix gas with air evenly, so the flame spreads uniformly around the ring. A stable, concentrated flame means faster heating and better cooking control. The standard mounting seat and center hole allow a direct-fit replacement of worn, clogged, or warped original distributors, restoring full burner performance in minutes.

    The Hugo 60-92mm gas stove distributor, as the core burner component, is widely used in gas stoves to evenly distribute gas on the fire ring. It is specifically designed to mix gas with secondary air through precise fire holes and radial grooves for efficient cooking. The distributor has a two-piece structure - a burner base with a central chamber and an upper cover with internal and external fire holes. The diameter range of 60mm to 92mm covers most standard built-in and desktop burner heads, with standard center holes and mounting seats for direct installation and replacement of worn, deformed, or clogged original devices. The biggest feature of this gas stove distributor is its uniform flame distribution and heat resistance durability, ensuring safer combustion and better cooking control.

    60-92mm Gas Stove Distributor

    Core advantages

    1. Suitable for a width of 60-92mm, one series covers multiple furnace heads

    Full coverage from 60mm to 92mm in diameter. The repair shop does not need to classify too many models according to size when stocking, and the whole machine factory can also flexibly select and match according to different models.

    2. Divide the fire evenly, with flames spreading throughout the entire circle without appearing weak

    The internal air duct and radial fire holes are designed according to the gas flow rate, and the gas and secondary air are fully mixed. The flame spreads evenly along the fire ring. There will be no situation where one side is strong while the other is weak, yellow hot, off flame, or off flame, and the bottom of the pot will be heated more evenly.

    3. High temperature resistance without deformation, stable even when exposed to open flames for a long time

    The substrate is made of high-quality materials, and the surface is treated with rust prevention/high temperature treatment. It will not deform, crack, or oxidize or peel after long-term use. The size of the fire hole is stable and will not become clogged over time.

    4. High precision of fire hole, not easy to block, not easy to accumulate carbon

    The fire hole is processed according to the standard aperture, with uniform air release and is not easily blocked by oil stains, soup, or carbon deposits. During daily cleaning, using a brush can restore the condition, unlike a rough fire cover that burns for a period of time and causes local fire weakness and tempering.

    5. Optimize the air duct for more complete and safer combustion

    The airway structure allows for a more reasonable ratio of gas to air, sufficient combustion, and lower production of carbon monoxide; The flame is resistant to interference from the airflow of the range hood, making it less likely for the flame to flutter when the range hood is turned on.

    6. Concentrated firepower, fast heating, and easy control of fire temperature

    The flame is stable and burns against the bottom of the pot, with high thermal efficiency. It heats up quickly when boiling water, stir frying, and stewing; The adjustment of firepower response is direct, with low fire not extinguishing and high fire not drifting, making it easier to control the cooking temperature.

    60-92mm Gas Stove Distributor

    Product Parameter

    Product name 60-92mm Gas Stove Distributor
    Available specification 60-92mm
    Available colors Customization is available upon request
    Samples available Small quantity samples can be provided; specific details are negotiable
    MOQ (Minimum Order Quantity) Negotiable
    Warranty time Generally 1 year, except for special cases
    Packing method Carton packaging; specific details are negotiable
    Place of origin Ningbo, China

    Hugo Gas Stove Distributor vs. Others

    Below is a comparison between Hugo firearms and common firearms in the market, to facilitate on-demand judgment.

    1. Material and temperature resistance

    Hugo: High temperature resistant substrate, surface rust prevention or high-temperature treatment, long-term use without deformation or peeling.

    Regular model: No surface treatment or thin treatment, prone to oxidation, peeling, rusting, and slagging after a period of burning.

    Thin aluminum/recycled materials: low melting point, poor strength, easy to deform after prolonged exposure to high heat, and misaligned fire holes after the fire cover is warped.

    2. Fire hole accuracy and fire distribution uniformity

    Hugo: The fire hole is processed according to the standard aperture, and the hole layout is designed according to the gas flow rate, with uniform exhaust and flames covering the entire circle.

    Regular model: The aperture size varies, the burrs are not clear, and it is easy to have one side strong and the other weak, and local yellow flames.

    Low quality model: The fire hole is rough or too large, which is prone to backfire and flame detachment. When the range hood is turned on, the flame is scattered.

    3. Anti clogging and cleaning

    Hugo: The hole position is regular, the surface treatment is in place, and the oily soup is not easy to accumulate. A brush can restore it with just one pass.

    Regular model: The hole opening is rough and prone to oil sticking. After burning for a period of time, local fire weakness may occur, requiring repeated perforation.

    Low quality models: fast carbon deposition, difficult to clean after hole blockage, often requiring only whole replacement.

    4. Size adaptation range

    Hugo: 60-92mm wide coverage, mainstream furnace heads can be optionally selected.

    Regular model: There are few sizes and models, and non-standard furnace heads often need to be modified or barely adapted.

    Low quality version: Large size deviation, poor concentricity when installed, and skewed flame.

    5. Installation and replacement

    Hugo: The standard center hole and mounting seat can be directly replaced in a few minutes after alignment.

    Regular model: The size labeling is inaccurate, often resulting in inability to fit or looseness.

    Low quality model: The card position is not tight, and it is easy to shift during use, which affects combustion.

    6. Combustion safety

    Hugo: Optimized airway, reasonable gas to air ratio, sufficient combustion, and resistance to airflow interference.

    Ordinary version: Insufficient mixing may result in yellow heat and black bottom.

    Low quality version: High risk of tempering and sparking, with potential safety hazards.

    60-92mm Gas Stove Distributor

    FAQ:

    Q1: What is the reason for the yellowing of the flame and blackening of the pot bottom in the fire separator?

    Mostly caused by insufficient mixing of gas and air. Common reasons include: blockage of the fire hole by oil stains, soup, and carbon deposits, resulting in poor air release; The gap between the firearm and the burner seat is not level, and gas is escaping through the gap; The opening of the air door is incorrect, resulting in insufficient air intake; Or the flame hole of the firearm itself may have rough processing and inconsistent aperture. Solution: First, turn off the air and let it cool down. Remove the fire separator and use a hard brush or fine needle to pass through the fire hole. Rinse with clean water and let it dry before reinstalling. At the same time, check if it is placed flat and if the air door needs to be fine tuned. If the flame still turns yellow after cleaning and adjusting the air flow, it indicates that the flame hole has been deformed or the aperture deviation is too large. It is recommended to replace the flame separator directly.

    Q2: How to determine if the size of the firearm is selected correctly?

    There are three main points to consider: first, the outer diameter, which is the maximum outer diameter of the original measuring machine's firearm, corresponding to the selection within the range of 60-92mm; The second is the diameter and positioning method of the center hole, which must match the original furnace head center column or mounting seat, and cannot be shaken or eccentric when installed; The third is the fitting surface between the fire cover and the base, which should be placed flat and without any raised edges or gaps. If the size is too small, it will loosen and shift, and the flame will deflect. If it is too large, it will not cover and the gas will leak out. Sending the front photo, back photo, and furnace head photo of the original firearm to Hugo customer service for verification on time is more accurate than just reporting one diameter.

    Q3: What should I do if the flame deviates to one side and there is no fire in some areas after installing the firearm?

    First, confirm whether the firearm is placed flat and fully seated. Often times, it is not stuck in the positioning slot or there are foreign objects pressing against the base, causing one side to be suspended and gas to pass through the gap. Next, check if the fire hole at the corresponding position is blocked, and retest after passing through the hole. Check again if there are any debris in the air duct of the furnace head base and if the air door is biased to one side.

    Send Inquiry
    Contact Info
    • Address

      Dongshantou Industrial Park, Guanhaiwei Town, Cixi City, Ningbo Province, Zhejiang Province, China

    • Tel

    Send an inquiry for washing machine parts, Hugo Part will confirm the correct specification and provide a quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept