Products

PRODUCTS

32.5-34.5cm 10-Tooth Washing Machine Pulsator
  • 32.5-34.5cm 10-Tooth Washing Machine Pulsator32.5-34.5cm 10-Tooth Washing Machine Pulsator
  • 32.5-34.5cm 10-Tooth Washing Machine Pulsator32.5-34.5cm 10-Tooth Washing Machine Pulsator
  • 32.5-34.5cm 10-Tooth Washing Machine Pulsator32.5-34.5cm 10-Tooth Washing Machine Pulsator
  • 32.5-34.5cm 10-Tooth Washing Machine Pulsator32.5-34.5cm 10-Tooth Washing Machine Pulsator

32.5-34.5cm 10-Tooth Washing Machine Pulsator

Hugo, as a professional manufacturer and supplier, supports customized services. The 32.5-34.5cm 10-Tooth Washing Machine Pulsator is designed for large-capacity semi-automatic twin-tub washers and commercial laundry machines. Its 10-tooth center drive hub engages securely with the gearbox shaft, delivering powerful torque transmission without slipping or wobbling during heavy wash cycles. The optimized vane geometry improves washing efficiency while protecting delicate fabrics from damage. Standard mounting dimensions allow direct replacement for most major brands, including Haier, Midea, Little Swan, Royalstar, TCL, and Panasonic. Ideal for repair shops, distributors, and OEM assembly.

    As a professional manufacturer, we are able to provide comprehensive customization services. Hugo high-quality 32.5-34.5cm 10-Tooth Washing Machine Pulsator is widely used in large capacity semi-automatic double bucket washing machines and commercial washing machines. It is specifically designed to accommodate heavy objects such as blankets and workwear, ensuring strong water flow and reliable support. There is a 10 tooth center drive hub at the bottom of the pulsator, which is used to firmly engage with the gearbox shaft, so that the entire washing system can provide torque without slipping. The large diameter of 32.5-34.5 centimeters, combined with optimized blade surfaces, creates a strong water flow that covers the entire bottom of the bucket during washing. Clothes roll fully with the water flow, and the detergent penetrates evenly, significantly improving the washing ratio. The large diameter wave wheel can effectively reduce the accumulation of clothes at the bottom of the bucket, lower the entanglement rate, and make the clothes wash more smoothly.

    32.5-34.5cm 10-Tooth Washing Machine Pulsator 32.5-34.5cm 10-Tooth Washing Machine Pulsator

    Product Parameter

    Product name 32.5-34.5cm 10-Tooth Washing Machine Pulsator
    Available specification 32.5-34.5cm diameter 10-Tooth
    Available colors Customization is available upon request
    Samples available Small quantity samples can be provided; specific details are negotiable
    MOQ (Minimum Order Quantity) Negotiable
    Warranty time Generally 1 year, except for special cases
    Packing method Carton packaging; specific details are negotiable
    Place of origin Ningbo, China

    Precautions for use

    Pre-installation check

    After unpacking, please first check whether the appearance of the pulsator is intact, whether the blades are damaged or deformed, and whether the central 10 tooth spline is complete without missing teeth. Flip the pulsator over and confirm that there are no burrs or foreign objects in the keyway hole. If any abnormalities are found, please contact customer service immediately for replacement and do not forcefully install.

    Installation specifications

    Before installation, please clean the debris, fluff, and residual detergent on the installation position of the pulsator and the output shaft of the reducer to ensure that the contact surface is clean. Align the pulsator with the spline shaft of the reducer, press it vertically into place, confirm that the spline is fully engaged, and then tighten the central screw. When locking, use appropriate tools with moderate force. Over tightening may cause deformation of the pulley, while over loosening may result in shaking and abnormal noise during operation. After installation, manually rotate the pulsator to confirm that it rotates smoothly and without any obstruction before powering on for testing.

    Usage environment

    Do not place heavy objects or stand on the pulsator to avoid deformation under pressure. When washing, do not exceed the rated capacity of the washing machine. Overloading can cause the pulsator and reducer to operate at high loads for a long time, accelerating wear and tear. Hard bottom clothing (with metal buckles, zippers, etc.) is recommended to be flipped over or placed in a laundry bag to prevent hard objects from getting stuck at the bottom of the pulsator and damaging the blades or spline teeth.

    Cleaning and maintenance

    It is recommended to clean the bottom of the pulsator every two to three months. After removing the pulsator, remove any tangled hair, loose threads, buttons, and other debris to prevent blockage of the water flow channel or jamming of the spline teeth, which may affect the transmission. When cleaning, rinse with clean water. Do not use steel wire balls or hard brushes to scratch the surface of the impeller to avoid damaging the smoothness of the blades. Do not use strong acids, strong alkalis, or organic solvents to clean the pulsator, as this may corrode the material.

    regular inspection

    Check the wear of the impeller blades and whether the central spline teeth are loose every six months. If the blades become noticeably worn and smooth, the spline teeth become worn, or there is abnormal noise and shaking during operation, please replace the new wave wheel in a timely manner to avoid affecting the washing effect or damaging the reducer.

    Core Advantages

    Ten tooth spline engagement, high torque without slipping

    The central 10 tooth spline structure is tightly engaged with the output end of the reducer, with a large contact area and uniform force distribution. At the moment of start-up, the large torque can be fully transmitted to the pulsator. The wave wheel is as stable as a rock, without slipping, shaking, or wear, and the forward and reverse switching is crisp and clean.

    Large diameter and wide water flow, washed clean without entanglement

    A large diameter of 32.5-34.5 centimeters is used to optimize the blade surface, forming a strong three-dimensional water flow that covers the entire bottom of the bucket during washing. The clothes roll fully with the water flow, and the detergent evenly penetrates the fibers, significantly improving the washing ratio. The large diameter design effectively reduces the accumulation of clothes at the bottom of the bucket, lowers the entanglement rate, and allows clothes to be washed more smoothly and cleanly.

    Enhance the material's resistance to heavy loads, durability without cracking

    Using reinforced materials, it will not age or crack after long-term immersion in chemical liquids such as detergents and bleach. The bottom is designed with dense reinforced mesh to disperse the stress caused by high torque, ensuring long-term high load operation without deformation or warping.

    Standard size is interchangeable and compatible with mainstream brands

    Specially designed for large capacity semi-automatic dual cylinder washing machines, the standard installation size directly replaces the original pulsator without any modification or additional accessories. Suitable for high-capacity models from mainstream brands such as Haier and Midea.

    Packaging and Shipping

    packing standard

    Each pulsator is individually packaged and wrapped in a thick PE bag to prevent scratching the surface during transportation. The outer box is made of cardboard boxes, and the wheels are fixed without shaking, ensuring safe and undamaged long-distance transportation. The box is labeled with the product model, quantity, gross weight, net weight, and export label.

    Shipping method: Please contact customer service for specific details

    Shipping Process

    Production completion → quality inspection and full inspection → packaging and boxing → booking/arranging express delivery → providing customs clearance documents such as packing lists → notifying customers of shipment and tracking until receipt.

    FAQ

    Q1: 10 What is the difference between a toothed wave wheel and a square hole wave wheel? Can it be used universally?

    The center of the 10 tooth wave wheel is a spline tooth structure, which transmits power through tooth meshing with the output end of the reducer. It has a large contact area and uniform force distribution, making it suitable for high torque and heavy load washing scenarios; The square hole wave wheel is matched with a reducer through a square shaft, with a simple structure and easy disassembly, suitable for conventional household models. The two cannot be used interchangeably, and forced installation can lead to poor engagement, abnormal operation noise, and even damage to the output end of the reducer. When making a purchase, be sure to confirm the shape of the center hole of the original machine's pulsator - choose 10 spline teeth and square holes.

    Q2: How can I confirm that my washing machine is compatible with the size range of 32.5-34.5cm?

    The most accurate method is to remove the old wave wheel and directly measure its maximum diameter. If the old part is damaged and cannot be measured, it can be judged based on the diameter of the washing machine's inner bucket. Simultaneously confirm whether the tooth profile and size of the central 10 tooth spline match. Send photos of the old pulsator or the size of the inner bucket to Hugo customer service, and we will confirm the compatible specifications within 30 minutes.

    Q3: Will large diameter pulsars damage clothes? Is it safe to wash delicate fabrics?

    Although the Hugo large-diameter wave wheel has strong water flow, the blade edges are rounded and finely polished to reduce friction and snagging on clothing. If washing particularly delicate clothes, it is recommended to put them in a laundry bag for double protection and peace of mind.

    Q4: Will the wear of the blades on the pulsator affect the washing effect after prolonged use?

    After the wear of the impeller blades, the surface becomes smooth and unable to form effective water flow. When washing, the clothes do not flip noticeably, and the washing ratio decreases. At the same time, wear may cause gaps between the pulsator and the reducer, resulting in abnormal noise or shaking during operation.

    32.5-34.5cm 10-Tooth Washing Machine Pulsator 32.5-34.5cm 10-Tooth Washing Machine Pulsator
    Send Inquiry
    Contact Info
    • Address

      Dongshantou Industrial Park, Guanhaiwei Town, Cixi City, Ningbo Province, Zhejiang Province, China

    • Tel

    Send an inquiry for washing machine parts, Hugo Part will confirm the correct specification and provide a quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept