Products

PRODUCTS

Small Power Refrigerator Motor
  • Small Power Refrigerator MotorSmall Power Refrigerator Motor
  • Small Power Refrigerator MotorSmall Power Refrigerator Motor
  • Small Power Refrigerator MotorSmall Power Refrigerator Motor

Small Power Refrigerator Motor

A low-power refrigerator motor is a low wattage drive device manufactured for refrigeration equipment, typically used as an evaporator fan motor, condenser cooling fan, or air circulation motor in commercial refrigerators, freezers, and display cabinets. Adopting low-noise bearings, anti icing seals, and compact flame-retardant shells, it maintains stable speed and low vibration in environments ranging from -30 ℃ to 60 ℃. When the original motor stalls, the refrigerator may experience uneven cooling, frosting, compressor overheating, or increased electricity consumption - our low-power motor can restore smooth air circulation by directly replacing it.

    Hugo Small Power Refrigerator Motor is widely used in household and commercial refrigerators, freezers, and display cabinets as a low-wattage drive unit for evaporator fans, condenser cooling fans, and internal air-circulation. It is specifically designed to push cold air evenly through the cabinet and pull heat away from the condenser coil, keeping temperature distribution stable and the compressor working under normal load. There is a compact flame-retardant housing on the motor, combined with pure-copper windings, low-noise bearings, and anti-icing seals, so that stable speed, low vibration.The biggest feature of this small-power motor is its quiet, steady running and durable winding structure, ensuring continuous air circulation, even cooling, and long service life without frost build-up or compressor overheating.

    Small Power Refrigerator Motor

    Product Features

    1. Low power consumption and low power consumption

    The rated power of the Small Power Refrigerator Motor is concentrated in the range of 5W-45W, and long-term continuous operation does not significantly increase the overall power consumption of the machine. For refrigerators and display cabinets that are powered on all year round, choosing the right motor will make the electricity bill look good.

    2. Pure copper winding, low temperature rise

    The stator is made of high-quality materials. Stable conductivity, low heat generation, controllable winding temperature rise during long-term operation, less likely to burn out due to overheating, and significantly longer lifespan than copper-clad aluminum parts.

    3. Silent operation, low noise

    The rotor is dynamically balanced and equipped with low-noise oil or ball bearings. After assembly, the vibration is measured and the operating noise is controlled at a low level. At night, the refrigerator does not buzz and make noise, and commercial display cabinets do not disturb customers.

    4. Resistant to low temperature and high humidity, not stuck

    The whole machine can operate in an environment of -30 ℃~60 ℃. The end cover seams are glued or sealed as a whole to prevent moisture and condensation from entering the winding; The bearing is pre coated with low-temperature lubricating grease, and the freezer fan remains dry and stable even at low temperatures for a long time.

    5. Stable speed and sufficient air volume

    The pole structure has stable rotational speed and reliable startup; The brushless DC model has adjustable speed and higher efficiency. The fan blades are matched with the air duct design, ensuring even blowing of cold air. The evaporator does not form thick ice locally, and the heat dissipation of the condenser can also keep up.

    Small Power Refrigerator Motor Small Power Refrigerator Motor

    Product Parameter

    Product name Small Power Refrigerator Motor
    Available specification Small Power
    Available colors Customization is available upon request
    Samples available Small quantity samples can be provided; specific details are negotiable
    MOQ (Minimum Order Quantity) Negotiable
    Warranty time Generally 1 year, except for special cases
    Packing method Carton packaging; specific details are negotiable
    Place of origin Ningbo, China

    Precautions for use

    1. Power off and disassemble again

    The motor is connected in series to the fan power supply circuit, and there is a risk of electric shock if the wires are disconnected while it is live, which can also cause a short circuit and burn the control board. Take photos and record the sequence before dismantling.

    2. Identify the voltage and type accurately

    The AC shield pole (110V/220V) and DC brushless (12V/24V) cannot be interchanged, and if connected incorrectly, the winding will be burned directly. Before replacing, check the voltage, power, and speed on the old motor nameplate.

    3. The axis and fan blades should be aligned

    Incorrect installation of D-axis, circular axis, and threaded axis may cause slipping or inability to fit in; The fan blades should be pressed in place, with sufficient axial clearance, and the rotor should not be stuck.

    4. Don't let the fan blades blow the wind

    After reinstalling, manually turn the fan blades to confirm that they do not scratch the shell or touch the evaporator fins, otherwise there will be loud noise and the blades are prone to breakage.

    5. Fix the wiring harness properly

    Do not place the outgoing line against the high-temperature area of the condenser or repeatedly squeeze it by the door to avoid aging and peeling of the insulation layer.

    6. Listen to sound when powered on for the first time

    After power on, listen for any abnormal noise and feel if the shell vibrates too much; If the fan is not running, first check the power supply and starting capacitor, don't rush to judge that the motor is broken.

    7. Do not turn hard during the frost period

    The freezer fan may be stopped by temperature control during defrosting and heating, which is normal protection. Do not manually force the fan blades.

    8. Keep the air duct unobstructed

    Don't fill the freezer too full and don't block the return air duct. If the air duct is blocked, the motor will not blow evenly even if it is improved.

    Q1: What will happen if the Small Power Refrigerator Motor breaks down?

    Common manifestations: The fan in the freezer or refrigerator does not turn, cold air cannot be blown out, and the temperature inside the box is uneven; Thick frost on the evaporator and localized lack of cooling; Poor heat dissipation of the condenser, prolonged non-stop operation of the compressor, and overheating of the casing; The operating noise increases or there is a buzzing noise; The overall power consumption of the machine has significantly increased. In these situations, first confirm whether the motor is rotating and whether the fan blades are stuck, and then determine whether replacement is needed.

    Q2: Can AC shielded pole motors and DC brushless motors be interchanged?

    Cannot be directly exchanged. The AC hood pole model is connected to 110V/220V mains power, with a simple structure and low cost; The DC brushless model requires a control board driver, with a power supply of 12V/24V, high efficiency, and adjustable speed. The two have different power supply methods, wiring pin positions, and drive circuits. Mixing them can burn the windings or damage the control board. When replacing parts, they must be selected according to the original machine type and nameplate parameters.

    Q3: How to confirm the voltage, speed, and shaft type compatibility of the motor?

    Check four items: rated voltage (110V/220V or 12V/24V), power and speed, shaft type (D-shaft/circular shaft/threaded shaft) and shaft length, installation hole position and outlet direction. Send the old motor nameplate photo, shaft end photo (with ruler), and refrigerator model to Hugo customer service to quickly confirm the compatible model.

    Q4: What is the reason why the new motor cannot rotate when installed?

    Possible reasons: abnormal power supply or loose plug connection; Wrong voltage type selection (AC version connected to DC); Failure of starting capacitor (AC version); Winding wiring error; Fan blade or rotor stuck; The DC control board has no output. It is recommended to first test the power supply and capacitance, then check if the wiring and rotor are smooth, and gradually investigate without repeatedly replacing parts.

    Q5: Is the loud noise from the motor itself a problem?

    Not necessarily. Common reasons include: blade deformation, dust accumulation, eccentricity, or scraping against the shell; Loose fixing screws and missing shock absorbers; Bearing wear and dryness; The dynamic balance of the rotor deteriorates; Lateral force on the shaft during installation causes concentricity deviation. It is recommended to first clean the dust, inspect the fan blades and shock absorbers, and then determine if there is a problem with the bearings or motor body.

    Q6: Is the motor durable? Why do some break down after one or two years?

    Hugo motor adopts low-noise bearings and anti icing sealing structure, which can be used normally for several years. The following situations can accelerate damage: long-term dryness and lack of lubrication of bearings; Dust accumulation on fan blades leads to increased load and high current; Condensed water or moisture enters the winding, causing insulation to decrease; Large voltage fluctuations and frequent start stop; Install eccentricity to cause bearing wear. Regularly cleaning the dust, keeping the air duct unobstructed, and installing it correctly can significantly extend its service life.

    Contact Us

    Hugo — Small Power Refrigerator Motor & Appliance Parts, Sourced Simple

    Email:nbws@hugopart.com

    WhatsApp / WeChat: +86 13123868594

    Send us your old motor photos (nameplate + shaft side) or model number.

    We'll match the right voltage, shaft, and mounting, give you a quick quote, and run full QC before shipment — motors that spin true, not surprises in the box.

    Looking forward to working with you — send us your inquiry today.

    Send Inquiry
    Contact Info
    • Address

      Dongshantou Industrial Park, Guanhaiwei Town, Cixi City, Ningbo Province, Zhejiang Province, China

    • Tel

    Send an inquiry for washing machine parts, Hugo Part will confirm the correct specification and provide a quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept