The 30-60W Table Wall Fan Motor is a compact AC drive device designed specifically for household and commercial desktop fans, wall mounted fans, and small vertical fans. Its output power is 30W to 60W, compatible with 110V/220V 50/60Hz, and can provide stable medium speed airflow, which is sufficient to meet the cooling needs of bedrooms, offices, and shops. It is also efficient enough for long-term daily operation. When the original motor buzzes without rotating, overheating, or losing wind power, the fan stops cooling the room - our 30-60W motor restores quiet, continuous airflow through directly installed replacement parts.
The Hugo 30-60W desktop wall mounted fan motor, as a compact AC drive unit, is widely used in household and commercial desktop fans, wall mounted fans, and small vertical fans. The motor has a flame-retardant shell, precision rotor, and self-lubricating oil immersed bushing or sealed ball bearing, which can ensure smooth rotation, low vibration, and quiet operation. The multi tap winding supports 3-speed control, and the built-in thermal protector adds a safety layer inside the enclosed fan body. The biggest feature of this fan motor is its stable multi speed output and durable operating structure, ensuring that the fan maintains a quiet and continuous airflow in one season after another.
Product Features
1. Practical power coverage, sufficient air volume without waste
30W-60W covers most of the table fans, wall fans, and small floor fans. The cooling of bedrooms, offices, and shops is sufficient, and prolonged use does not significantly increase electricity bills, which is more practical than "piling up high power".
2. Three speed regulation, wind speed can be adjusted as desired
The multi tap winding supports switching between low, medium, and high wind speeds, which can meet the requirements of weak wind sleep and fast cooling in strong winds. The gear switching is smooth and seamless.
3. Pure copper/copper-clad aluminum winding, resistant to continuous operation
The winding can be made of pure copper (high efficiency, low temperature rise) or copper-clad aluminum (more cost-effective), with stable conductivity and controllable heating. In summer, it lasts for several hours and is not easy to break wires or burn windings.
4. Low noise and low vibration, quiet and not noisy
The rotor is dynamically balanced and equipped with oil containing bearings or sealed ball bearings, ensuring smooth operation and low noise. Sleeping with it on at night won't make a buzzing noise.
5. Built in overheating protection, safety cover
The winding is equipped with an overheat protector, which automatically shuts off when overloaded or poorly cooled, avoiding burning and smoking of the winding. It can also be installed in a closed fan body with peace of mind.
Product Parameter
Product name
30-60W Table Wall Fan Motor
Available specification
30-60W
Available colors
Customization is available upon request
Samples available
Small quantity samples can be provided; specific details are negotiable
MOQ (Minimum Order Quantity)
Negotiable
Warranty time
Generally 1 year, except for special cases
Packing method
Carton packaging; specific details are negotiable
Place of origin
Ningbo, China
Selection Recommendations
Choose the appropriate Hugo 30-60W desktop wall fan motor to ensure direct replacement and long-lasting, quiet airflow. Based on the typical structure (standard/extended shaft for desktop/wall fans), consider the following factors before placing an order:
1. Confirm the rated power and voltage
Firstly, match the specifications of the original motor. Our motor power range is 30W to 60W, 110V/220V, 50/60Hz compatible. For residential bedroom/office fans, 220V is standard configuration; For certain commercial or export markets, 110V may be required. The power should be consistent with the original wind power (typically 40W-50W for a 12 inch fan).
2. Installation of desktop fans and wall mounted fans
Desktop fan motor: typically equipped with a standard shaft for desktop/vertical fan heads (such as 12 inch Hongyun or exposed type). Select this option for regular desktop/upright fans.
Wall mounted fan motor: designed specifically for wall mounted brackets. Ensure that the installation holes and bracket positions match the fan body.
3. Standard axis and plus axis
Standard shaft: Suitable for most original fans with blades and grilles installed normally. The most suitable for direct replacement without the need for additional depth.
Extended shaft: When the fan head requires a longer front shaft for thicker blades, special grilles, or deeper wall mounted enclosures, an extended shaft is needed. If your original motor shaft looks short or the blade position is incorrect, the extended shaft version can solve this problem.
4. Speed control and safety
All motors support 3-speed control through multi tap windings. The built-in thermal protector and flame-retardant casing are standard features - an ideal choice if your original motor overheats or buzzes without rotating.
Quick recommendation summary:
Ordinary 12 inch desktop/vertical fan → table fan motor (standard shaft)
Desktop fan with deep blades/grille or special accessories → Workbench fan motor (long axis)
Wall mounted fan (ordinary) → Wall mounted fan motor (standard shaft)
Wall mounted fans require longer front axles → Wall mounted fan motors (long axles)
Real user experience
1. From home appliance wholesaler · Regarding batch consistency
We ordered 200 for the summer. Each cardboard box we opened had the same axle length and installation mode - no mixed batches, no surprises. This is important for us because our repair shop installs these every day and cannot afford installation issues
2. From the repair chain boss · About durability
The old motors we purchased locally burned out within a quarter. Hugo's copper wound motors have been running in our customers' stores for over a year and have hardly been returned. The thermal protector is a real difference - we have not received any overheating complaints
FAQ:
Q1: Can table fan motors and wall fan motors be used interchangeably?
Not directly applicable. The installation structures of the two are different: the table fan motor is usually equipped with a base and a shaking mechanism, while the wall fan motor is equipped with a wall bracket, and the shaft length and installation hole position also differ. Mixing may result in failure to install, incorrect blade position, or shaking malfunction. When replacing parts, choose according to the original machine type. It is uncertain whether to send photos of the old motor to Hugo customer service for confirmation.
Q2: How to choose between standard shaft and extended shaft?
Check the installation depth of the original fan blades and mesh cover. Ordinary table fans and wall fans can use standard shafts; If the fan blades are thick, the mesh cover is deep, the wall fan box is too deep, or if the original motor is not installed with the blade top in place or the scraper cover is not rotated, then choose the extended shaft version. The safest way is to measure the length of the old motor shaft extension and select according to the data.
Q3:30-60W How to choose power?
Select according to the original motor nameplate power and fan size. 12 inch table fans and wall fans commonly have a power of 40W-50W; Small size or low-speed requirements can be selected at around 30W; High air volume demand or commercial option up to 60W. Low power, insufficient air volume, and the motor is prone to heating up at full load for a long time; Excessive power, noise, and increased power consumption. I'm not sure if it will be configured according to the original machine parameters.
Q4: What is the reason for the motor buzzing but not turning?
Common reasons: Failure of starting capacitor (most common for capacitor models); Dry bearings and rotor jamming; The fan blades are stuck by foreign objects or accumulate excessive dust; Partial short circuit of winding; The power supply voltage is too low. Troubleshooting sequence: After power failure, manually turn the fan blades to check for smoothness, then measure the capacitance, and finally check the winding and power supply. Don't rush to declare the motor scrapped.
Q5: What's going on when only one gear or a certain gear doesn't turn after switching on?
Three speed regulation is achieved through multi tap windings, and wiring errors are the most common cause. Please compare the original machine wiring method to check if the common line and each gear line are connected correctly, and also check if the gear switch itself is damaged. Before connecting the wires, be sure to cut off the power. After connecting, perform a no-load test run before installing the fan blades.
Q6: The motor noise is loud, is it a problem with the motor?
Not necessarily. Common reasons include: dust accumulation on the fan blades, loss of dynamic balance, deformation of the fan blades, resonance caused by loose installation screws, dry and worn bearings, and misalignment between the fan blades and the motor shaft. It is recommended to first clean the fan blades, tighten the screws, check the installation position of the fan blades, and then determine whether there is a problem with the bearings or motor body.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy