Products

PRODUCTS

30-Minute 2-Piece Air Fryer Timer
  • 30-Minute 2-Piece Air Fryer Timer30-Minute 2-Piece Air Fryer Timer
  • 30-Minute 2-Piece Air Fryer Timer30-Minute 2-Piece Air Fryer Timer
  • 30-Minute 2-Piece Air Fryer Timer30-Minute 2-Piece Air Fryer Timer

30-Minute 2-Piece Air Fryer Timer

The 30-Minute 2-Piece Air Fryer Timer​ is a mechanical countdown switch built for air fryers, ovens, and small kitchen appliances. Turning the knob winds the internal spring; as it unwinds, a gear train drives the dial and a cam opens the contacts at zero — cutting power to the heater and fan automatically, with a "ding" alert. The 2-piece structure means a clean knob-and-body split for fast panel assembly.When the original timer sticks, fails to reset, or won't cut off, this direct-fit replacement brings the air fryer back to reliable "set-and-forget" cooking.

    As a professional manufacturer, we are able to provide comprehensive customization services. Hugo 30-Minute 2-Piece Air Fryer Timer is widely used in air fryers, small ovens, toaster ovens, and other small kitchen appliances as a mechanical countdown switch. It is specifically designed to control heating time in a simple, mechanical way: the user turns the knob to wind the internal spring, the gear train drives the dial as the spring unwinds, and a cam opens the contacts at zero, cutting power to the heater and fan automatically with an audible "ding" alert. The biggest feature of this air fryer timer is its pure electromechanical design and 2-piece assembly, ensuring stable timing accuracy and long service life in high-temperature kitchen environments.

    30-Minute 2-Piece Air Fryer Timer

    What Is the Hugo 30-Minute 2-Piece Air Fryer Timer?

    The Hugo 30 Minute 2-Piece Air Fryer Timer is a mechanical countdown switch installed on the panel of small kitchen appliances such as air fryers, small ovens, and spit drivers. It is responsible for setting the heating time and automatically cutting off power when the time comes.

    30-Minute 2-Piece Air Fryer Timer 30-Minute 2-Piece Air Fryer Timer

    What is it?

    Mechanical timer: It is composed of a mainspring, a gear set, a cam, and contacts inside. When the knob is turned to wind the mainspring, the mainspring slowly releases and drives the gear to travel, and it runs purely mechanically

    30 minute single turn: Rotate the knob to the end for 30 minutes, turn as much as you want, and it will automatically reset to zero after turning

    Two piece structure: The knob and body are separated, and the knob can be separately installed on the panel for flexible assembly

    Contact specifications AC 250V/15A: directly connected in series with the power supply circuit of the heating tube and fan to turn on and off the mains power

    Axis options: D-axis or circular axis, compatible with different knobs and panels

    What can it do?

    Set time: The user rotates the knob to set the number of minutes, and the machine works according to the set time

    Point to point power outage: When reset to zero, the cam opens the contact point, automatically cutting off the power supply of the heating tube and fan to prevent burning and dry burning

    Reminder: At the moment of zeroing, there is a "ding" sound, indicating the end of cooking

    What problem does it solve?

    Forgetting to turn off the fire and grill: set the time to automatically turn off the power, no need for human supervision

    Electronic timing board malfunction: The control board is broken and the timing is malfunctioning. The mechanical timer has a simple structure and can be directly replaced to restore it

    Assembly trouble: The integrated knob is difficult to align, while the two-piece design allows the knob to be installed separately, making the production line faster

    Unstable at high temperatures: Electronic components are prone to drift and failure in high-temperature environments of ovens, while mechanical structures are resistant to high temperatures and have stable travel time

    Product Parameter

    Product name 30-Minute 2-Piece Air Fryer Timer
    Available specification 30-Minute 2-Piece
    Available colors Customization is available upon request
    Samples available Small quantity samples can be provided; specific details are negotiable
    MOQ (Minimum Order Quantity) Negotiable
    Warranty time Generally 1 year, except for special cases
    Packing method Carton packaging; specific details are negotiable
    Place of origin Ningbo, China

    Precautions for use

    1. Before installing the 30 Minute 2-Piece Air Fryer Timer, the power must be disconnected

    Before installing, wiring, or replacing the timer, be sure to unplug the power plug and confirm that the heating tube and fan circuit are completely powered off. When there are capacitive components in the air fryer, it is necessary to wait for discharge before operating to avoid electric shock. 30 minute 2-piece air fryer timer

    2. The wiring should be correct, don't connect the wrong circuit

    Two pins are respectively connected to the mains circuit of the heating tube/fan, and connected according to the original machine wiring method. Connecting the wrong wire may cause the timer to not operate, the power to the point to not be cut off, or even a short circuit. After the wiring is completed, conduct a no-load test run to confirm that the power can be cut off normally at the point before installing the panel.

    3. Turn the knob in the right direction, don't force it

    Turn the knob clockwise to set the time, and turn it all the way to 30 minutes; Do not forcefully twist the mechanical timer counterclockwise to cross the zero point, as twisting it counterclockwise can damage the mainspring and gears. When setting, simply turn it to the desired scale, there is no need to turn it over and then back out.

    4. Do not exceed the rated load

    The contact specification is AC 250V/15A, and the total current of the connected heating tube and fan cannot exceed this rated value. Overloading can cause adhesion and erosion of contacts, resulting in situations where power is not cut off at the designated point.

    5. Avoid frequent violent actions

    The knob should be turned smoothly, and should not be quickly and repeatedly turned to the bottom or forcefully turned back. Clockwork and gear sets are precision mechanical components, and violent operation can accelerate wear and affect timekeeping accuracy.

    6. Keep the panel openings aligned and do not subject the knobs to force

    In the two-piece structure, the knob is installed separately on the panel. During installation, ensure that the knob is aligned with the axis of the body and do not install eccentrically. Eccentricity of the knob can cause the shaft to bear lateral forces, resulting in inaccurate or stuck travel due to long-term use.

    7. Stay away from direct water vapor and keep dry

    Although the timer body is enclosed in a metal shell, the installation position of the panel should avoid direct exposure to water vapor and long-term condensation of steam. The humid environment in the kitchen can easily lead to contact oxidation and rusting of metal parts, affecting the reliability of continuity.

    8. Do not rinse with water or wipe the contact points with a damp cloth during cleaning

    When cleaning the panel, simply wipe the surface of the knob with a dry or slightly damp cloth. Do not rinse the timer body directly with water, and do not let water enter the pin and contact areas. Turn off the power before cleaning.

    9. Stop immediately upon discovering abnormalities

    If the following situations occur, the inspection should be stopped: the power is not turned off when the time is up, the knob cannot be turned or rebounds abnormally, the travel time is noticeably faster or slower, and there is a burning smell or ignition sound from the contact. These are mostly caused by contact erosion, spring failure, or gear wear, and the timer needs to be replaced and should not be continued to be used.

    10. Long term disuse requires moisture and rust prevention

    When the electrical appliance is not in use for a long time, the timer should be kept in a dry environment to avoid the metal shell and pins from getting damp and rusting. Before reactivation, conduct a no-load test run to confirm that the operation and power-off are normal before use.

    FAQ:

    Q1:30- What is the reason for the Nute 2-Piece Air Fryer Timer not turning off power or the knob not turning or returning to zero?

    There are three common reasons: first, contact erosion and adhesion, which are often caused by long-term overload or frequent interruption of high current, and the contact cannot be disconnected after sticking; Secondly, if the mainspring fails or the gear is worn, and there is a feeling of emptiness or abnormal rebound when turning the knob, it indicates that the internal mechanical components have been damaged; The third reason is that the axis is eccentric during installation, and long-term lateral force causes jamming. It is recommended to replace the timer directly when these situations occur, as mechanical wear cannot be repaired through simple adjustments.

    Q2:What does a 30 minute lap mean? Can we set a longer time?

    It takes 30 minutes to turn the rotary knob clockwise from zero position to the end. The number of turns will go as much as possible, and it will automatically reset to zero and turn off the power. This is the fixed stroke of a single cycle mechanical timer and cannot be set for more than 30 minutes. If the recipe requires a longer time, it needs to be set twice or a timer model with a different range should be selected.

    Q3: How to connect the two pins? What will happen if I make a mistake?

    Two pins are respectively connected in series to the mains circuit of the heating tube and fan, and connected according to the original machine wiring method. The contact specifications are AC 250V/15A, and the total load current cannot exceed the rated value. Connecting the wrong wire may cause the timer to not operate, power to the point to not be cut off, or even short-circuit and burn the contacts. Before connecting the wires, be sure to cut off the power. After connecting, try running the wires without load to confirm that the power can be cut off normally before installing the panel for use.

    Send Inquiry
    Contact Info
    • Address

      Dongshantou Industrial Park, Guanhaiwei Town, Cixi City, Ningbo Province, Zhejiang Province, China

    • Tel

    Send an inquiry for washing machine parts, Hugo Part will confirm the correct specification and provide a quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept