Products

PRODUCTS

Water Dispenser Faucet
  • Water Dispenser FaucetWater Dispenser Faucet
  • Water Dispenser FaucetWater Dispenser Faucet
  • Water Dispenser FaucetWater Dispenser Faucet

Water Dispenser Faucet

Hugo Part produces professional water dispenser faucets that are compatible with bottled water dispensers, hot and cold water purifiers, and office water dispensers. The main body is made of food grade odorless plastic, which is resistant to alternating cold and hot temperatures of 0-100 ° C and safe without lead. Bottom independent water outlet, splash proof and leak proof; Top deep blue press/push cup handle, built-in metal spring return, smooth press, release to cut off water, prevent dripping. Is the original faucet leaking, stuck, or not tightly closed? This direct installation replacement restores hygiene for one handed water collection.

    This water dispenser faucet is a direct installation water outlet accessory specially designed for barrel water dispensers and hot and cold water purifiers.

    Water Dispenser Faucet

    The product adopts a classic L-shaped valve body structure: the main body is made of food grade white safety plastic, which is visually clear and resistant to daily wear and tear. Can be stably embedded into mainstream water dispenser panels; Press smoothly and release to break, effectively preventing dripping and leakage.

    The product has a temperature resistance range covering 0-100 ° C alternating hot and cold, lead-free and odorless, ensuring safe contact with drinking water. Regarding common issues with original faucets such as water leakage, stuck handle, loose closure, and clogged water scale.

    Core advantages

    1. Food grade material, safe drinking water with peace of mind

    The main body adopts food grade new materials, which are lead-free, BPA free, odorless, do not release harmful substances, and meet the standards for contact with drinking water. The white body and deep blue handle color scheme is clean and intuitive, and the hot and cold ends can be distinguished by red and blue to avoid cross contamination and secondary pollution.

    2. Water Dispenser Faucet can be pressed to release water, released to break, without dripping or leaking

    Lightly press to release water, release for seconds to break. The valve core is equipped with a high elasticity silicone sealing ring, which is physically compressed to prevent dripping and leakage, bidding farewell to the old problem of "dripping water when turned off and water surface area on the water receiving platform".

    3. L-shaped splash proof water nozzle, one handed water connection is smoother

    The bottom vertical water outlet is designed to guide the flow, so that the water flow is concentrated and does not splash; Push cup/press one handed operation for easy water collection, suitable for use in offices, living rooms, and tea rooms.

    4. Horizontal thread straight installation, stable sealing, no modification

    Horizontal external thread connection+flange surface+thickened sealing ring, suitable for mainstream water dispenser panel openings. Tighten and seal, no need to change holes or add accessories for maintenance and replacement.

    5. Cold and heat resistance, universal for 0-100 ° C

    The valve body and water contact parts are resistant to alternating cold and hot temperatures, and can be used for normal temperature water, ice water, and hot water ends without brittleness, aging, scaling, or jamming. They remain smooth even after long-term high-frequency use.

    Working principle

    The Hugo water dispenser faucet is a pure mechanical pressing structure: the valve core is usually pressed tightly by a spring, and the silicone ring is pressed and sealed, ensuring that the water circuit is closed without dripping water; Press the handle, the lever pushes the valve core downwards, and the sealing surface opens to release water; Release the spring and rebound, the valve core resets and presses tightly against the cover, instantly cutting off the water flow. Not relying on electricity or circuits, relying solely on the combination of springs and sealing surfaces, pressing smoothly and releasing will break, and it is not easy to close tightly even after prolonged use.

    Product Parameter

    Product name Water Dispenser Faucet
    Available specification Specific negotiations
    Available colors Customization is available upon request
    Samples available Small quantity samples can be provided; specific details are negotiable
    MOQ (Minimum Order Quantity) Negotiable
    Warranty time Generally 1 year, except for special cases
    Packing method Carton packaging; specific details are negotiable
    Place of origin Ningbo, China

    How to maintain

    The faucet of a water dispenser is exposed to water, heat, and scale for a long time. The focus of maintenance is not on "repairing", but on preventing scale, bacteria, and leakage.

    1. Daily cleaning (changing water every week/time)

    Turn off the power, remove the bucket, and drain the remaining water before wiping.

    Wipe the handle, water outlet, and panel contact surface with a slightly damp soft cloth. Do not use steel wire balls or hard brushes to avoid scratching the plastic and hiding bacteria.

    Focus on cleaning the scale ring at the root of the silicone ring.

    Pour, rinse, and dry the water tray weekly to prevent water accumulation and mold growth.

    2. Regular descaling (once every 1-2 months in hard water areas)

    Remove the drain nozzle (be careful not to throw the silicone ring/O-ring) and soak it in white vinegar or food grade citric acid solution at room temperature for 30-60 minutes.

    Gently brush the soft bristled toothbrush in the direction of the water outlet, dissolve the white scale, rinse with clean water, air dry, and then reinstall.

    The inside of the machine can be synchronously flushed with citric acid circulation, but do not use hot water to scald plastic parts or concentrated 84 disinfectant, as it will corrode the valve body and sealing ring.

    3. Waterproof inspection

    Check if there is any water leakage in the threaded interface: If it is loose, cut off the power and water, re align the silicone ring, and tighten the nut firmly. Do not forcefully tighten it.

    Dripping water from the bottom of the water outlet: It is often due to the blockage of scale on the valve core or aging of the O-ring. First, clean and remove the scale; If it still drips, replace the sealing ring or directly replace the entire faucet.

    Slow rebound of the handle, continuous water flow when released: scaling of the spring or valve core, disassembly and cleaning of the valve core; Replace directly if aging is severe.

    4. Usage habits

    Press to fetch water gently, do not forcefully push the cup or pry the handle with tools.

    The hot water end should avoid sudden boiling water rushing, as long-term overheating can accelerate the aging of the handle and seal ring.

    Wipe the smart seat and bucket mouth when changing water to reduce bacteria entering the pipeline.

    5. Long term discontinuation

    Drain the machine of stored water, unplug the power, and remove the water bucket.

    The faucet should be kept dry, and the O-ring can be lightly coated with food grade silicone grease to prevent cracking.

    Before reusing, rinse with clean water for 30 seconds to 1 minute before drinking.

    Water Dispenser Faucet Water Dispenser Faucet

    FAQ:

    Q1: What is the reason why the faucet keeps dripping when turned off?

    There are three common reasons: first, the valve core or outlet nozzle forms scale, which leads to the sealing surface not being tightly closed, which is the most common; The second issue is that the silicone sealing ring/O-ring is aging, deformed, or compressed during installation; The third reason is spring fatigue, and the handle does not return properly. Troubleshooting sequence: First, cut off the power and water supply. Remove the water outlet and soak it in citric acid or white vinegar to remove scale. Check if the O-ring is intact and installed correctly. If it still drips after cleaning, it indicates that the seal has aged. It is recommended to replace the seal ring or directly replace the entire faucet.

    Q2: How to deal with water seepage when installing horizontal threads?

    First, confirm whether the silicone ring is attached to the flange surface, whether it is pressed off center or missing installation; Recheck if the panel openings are too large and if the threads are properly screwed in. Solution: After cutting off the power and water, remove it and replace it with a new thick silicone ring. Align it and tighten the nut to "steady". Do not forcefully tighten it, as excessive tightening may fracture the gasket or thread and cause leakage. If the panel opening is significantly larger, an adapter gasket can be added and then locked.

    Q3: Can this faucet be used for both hot and cold ends? How to distinguish?

    The valve body and water contact parts are resistant to 0-100 ° C, and the structure of the hot and cold ends is universal, mainly distinguished by the color of the handle: dark blue is usually the cold/normal temperature end, and red is the hot water end. Install according to the original machine's hot and cold labels during installation to avoid burns caused by incorrect connections. It is recommended to confirm the temperature resistance requirements for long-term use of the hot water end to avoid sudden boiling water rushing and accelerating the aging of the handle and sealing ring. Support customization of colors and hot/cold labels according to customer requirements.

    Send Inquiry
    Contact Info
    • Address

      Dongshantou Industrial Park, Guanhaiwei Town, Cixi City, Ningbo Province, Zhejiang Province, China

    • Tel

    Send an inquiry for washing machine parts, Hugo Part will confirm the correct specification and provide a quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept