Hugo 70-90mm Washing Machine Suspension Spring Foot is designed for vibration damping and stable support in semi-automatic twin-tub washing machines and spin dryers. Available in 70mm, 75mm, 80mm, 85mm, 90mm height options to suit different machine bases and floor clearances. Built with a high-tension steel spring core and a wrapped rubber damping sleeve, it absorbs shock during high-speed spin cycles, preventing the machine from "walking", bouncing, or knocking against the wall.
As a professional manufacturer, we are able to provide comprehensive customization services. Hugo 70-90mm Washing Machine Suspension Spring Foot is widely used in semi-automatic twin-tub washing machines and spin dryers for vibration damping and stable support. It is specifically designed to accommodate different machine bases and floor clearances, ensuring seamless integration and reliable shock absorption. There is a high-tension steel spring core inside the foot, combined with a wrapped rubber damping sleeve, so that the vibration during high-speed spin cycles can be effectively absorbed.
What Is a 70-90mm Washing Machine Suspension Spring Foot?
Washing machine shock-absorbing spring feet, also known as shock-absorbing foot pads or suspension spring feet, are shock-absorbing support components installed at the bottom four corners (or three feet) of the washing machine body. It connects the washing machine base to the ground, consisting of a high tension spring and rubber damping sleeve inside, and an anti slip rubber base wrapped around the outside, which is the "first line of defense" for the stable operation of the washing machine.
Its core functions are threefold:
Absorb vibrations and prevent displacement. When the washing machine is dehydrated, the speed is high and the vibration is large. The spring foot absorbs and disperses the vibration energy through the expansion and contraction of the spring and the damping effect of the rubber, preventing the washing machine from "dancing", jumping or slowly shifting and hitting the wall.
Support the body and keep it level. The spring foot supports the weight of the entire washing machine and keeps the body level through height adjustment (70-90mm multiple options), ensuring smooth operation of internal components and reducing abnormal noise and wear caused by tilting.
Moisture and rust prevention, extending lifespan. Spring feet that come into long-term contact with the ground are prone to moisture and rust. Hugo spring feet are made of galvanized springs and anti slip rubber bases, which are resistant to moisture and wear. They are not easily corroded or aged after long-term use in humid environments such as bathrooms and balconies.
When is it necessary to replace the spring foot?
The washing machine shakes and shifts violently during dehydration;
The body is noticeably tilted and the heights of the four corners are inconsistent;
Spring foot fracture, deformation, spring corrosion failure;
The rubber base is worn and detached, losing its anti slip function.
Product Parameter
Product name
70-90mm Washing Machine Suspension Spring Foot
Available specification
70-90mm
Available colors
Customization is available upon request
Samples available
Small quantity samples can be provided; specific details are negotiable
MOQ (Minimum Order Quantity)
Negotiable
Warranty time
Generally 1 year, except for special cases
Packing method
Carton packaging; specific details are negotiable
Place of origin
Ningbo, China
Selection suggestions
The shock-absorbing spring foot looks simple, but its height, interface, and elasticity are not correct, and it still "dances" when installed. Please select according to the following steps:
Step 1: Measure the free height (most crucial)
Lay down the washing machine, remove the old spring feet, and measure the total height with a ruler in a natural state without compression or load.
70-75mm: Short legged model, low base dehydrator
80mm: The most commonly used standard height
85-90mm: High foot models, scenes that require moisture protection from the ground
Choose the specification closest to the nominal value of the original, a difference of more than 2mm may affect the level of the aircraft.
Step 2: Check the installation interface
Confirm whether the footrest is snap on, screw fixed, or plug-in, and whether the top connection diameter matches the motor bracket/chassis hole position. The interface is incorrect, the spring cannot be securely installed no matter how good it is.
Step 3: Check the thickness and elasticity of the spring
Press the old spring with your hand: it rebounds firmly and does not jam, which is normal; If it becomes loose without resistance or breaks, it must be replaced.
Small capacity dual cylinder/dehydrator: standard elasticity is sufficient
Large capacity, high-speed models: choose thicker spring cores and more stable damping specifications
Step 4: Check the usage environment
Wet environment in bathroom/balcony: choose galvanized spring+anti-aging rubber sleeve for rust and mold prevention
Slippery tile floor: choose a large contact surface and anti slip rubber bottom
Uneven ground: Priority should be given to selecting sets of the same height, and then adjusting the level with shims
Step 5: It must be replaced as a set
Even if only one foot is broken, it is recommended to replace all four (or the entire set of triangular supports) at the same time. Inconsistent elasticity between the old and new springs can lead to uneven force distribution at the four corners, causing them to shake and collide with the bucket shortly after use.
Return and exchange rules
Warranty period
This product comes with a 12-month warranty. The warranty scope is limited to non-human issues such as material defects, spring process defects, rubber sleeve cracking (non external force), transportation damage, etc.
Situations where returns and exchanges can be applied for
Upon arrival, obvious manufacturing defects such as spring breakage, deformation, and rubber sleeve shortage/cracking were found;
Packaging damage and product deformation caused by transportation (outer box and unboxing photos need to be retained).
Situations where returns and exchanges are not supported
After installation, the spring is permanently deformed due to hard prying, strong pressure, and overload use;
Self cutting, welding, modification or secondary processing;
Long term immersion in water, oil pollution corrosion, exposure to sunlight aging and other environmental issues;
No order number, no clear problem photos, out of warranty period;
Single replacement but incomplete replacement of the four legs of the whole machine, resulting in secondary damage caused by uneven force distribution.
After sales processing flow
After receiving the goods, promptly open the box for inspection and contact Hugo after-sales service within 48 hours if any problems are found;
Provide: order number+clear photos or videos of the front and back/side of the product+problem explanation;
After the technical team confirms that it is a quality issue, provide a solution;
FAQ
Q1: What will happen if the spring foot is broken? What are the consequences of not changing?
Spring foot damage usually manifests as severe shaking, displacement, "dancing" of the washing machine body during dehydration, and even slow movement hitting the wall; The body is noticeably tilted and the heights of the four corners are inconsistent; The spring foot is broken, deformed, or the rubber base is worn and detached. If not replaced in a timely manner, vibration will be transmitted to internal components, causing wear and tear on acceleration motors, reducers, chassis, and other components. In severe cases, it may lead to damage to the body structure or leakage of connecting pipelines.
Q2: How to choose a height of 70-90mm? Do all four feet have to be the same height?
First, measure the height of the original machine spring foot and select the closest specification. Hugo offers five height options: 70mm, 75mm, 80mm, 85mm, and 90mm. It is recommended to use the same height specification for all four feet to ensure that the body is level. If the ground is uneven, shims can be added under individual feet for fine adjustment, but the height of the spring script should be consistent.
Q3: Is the installation of spring feet complicated? Can I exchange it myself?
Installation is very simple and does not require professional tools. Tilt or lay down the washing machine, remove the old spring feet, align the new spring feet with the installation position, and insert or tighten them. Usually, it takes 10-15 minutes to replace all four feet. Pay attention to ensuring that the spring foot is fully in place and the buckle is locked during installation. After installation, straighten the washing machine and check whether the four corners are landing smoothly.
Q4: Is the spring foot durable? Will it rust in a humid environment?
The Hugo spring feet are made of galvanized spring steel core and have undergone rust prevention treatment on the surface. They are not easy to rust after long-term use in humid environments such as bathrooms and balconies. The external rubber damping sleeve and anti-skid base are made of wear-resistant rubber, which is anti-aging and wear-resistant. If the spring is severely corroded or the rubber is aged and cracked, it should be replaced in a timely manner.
Contact Us
Email: nbws@hugo.com
WhatsApp / WeChat: +86 13123868594
Our team usually replies fast and is happy to help you match the right part, confirm specifications.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy